Boho Skirt!

Ok...so last week was a blur of metal (pendants) and fabric!  I'm still working on the pendants.  I am so obsessive....I'm up to 51 pendants but only about 15 have the images and resin in them so far.  I'll get back to them.

I really wanted to finish up a new skirt.  I have been making these skirts from men's shirts from the Thrift Store which I launder, cut up and piece back together.  I have sold several of these at my shows and I'm thinking of putting this one on Etsy.  I also made the crocheted hat and boot cuffs.

I have finally decided on what to do for the giveaway!  Details later this week!

New Tinies

Anyone who knows me, or knows my art, knows I have a warped sense of humor!  When I am painting, I never add any words until the very end because I love how words can completely change the meaning of a painting.  So yesterday afternoon, I was putting the finishing touches on a couple of new small paintings.  As I found just the right words, I was actually laughing out loud!  My husband looked at the "Kiki" painting and said, "Well, I guess there are people out there who share your weird sense of humor."  All I can say is, "Thank God there are some who do"!!!!

Both of the following paintings are acrylic background (with paper and watercolor thrown in), the circular focal is watercolor and colored pencil.

Kiki

Eddie

Oh, by the way...I haven't forgotten!  I'll be having some sort of giveaway when I reach 100 followers.  I'm at 98....WOOHOO!

In Progress

I've been very busy this week...but nothing finished to show for it!  Some of the things I do are just so darned time consuming!  I wanted to make some little Dolly Pendants so I spent all day yesterday sculpting.  I ended up with 6 pendants, 2 figures and a large head for a Dollandia person.  Now I have to wait about a week before I can do the first firing.  If they aren't dry all the way through, they will blow up in the kiln.  Here are the pendants before the first fire (the little girl second from the right is a little figure, not a pendant):

Next, I glanced over and saw the little rat painting and thought "how cool would it be to sculpt that?"!!  Here it is.  Of course, the wheels will have to be added later and the stilt is just to hold it up while it dries.  I am so excited to see it painted!

If you are interested in the music of my daughter, Bailey, here is a link to her original song Dear California .   Also, she and her oldest sister, Daryl, made a fun video of Count on Me together.  Make sure you watch to the end for the bloopers.  They were pretty funny!

An Artfest Love Letter... and a New Painting

As I'm sure most of you have heard by now, Artfest 2012 will be the last one.  Teesha Moore has decided to follow a new path.  I can totally respect her following her instincts while at the same time, I am heartbroken.  Artfest has meant so very much to me.  I first went to Artfest 2008 and I have to say, it changed my artistic life.  At the time, I was mostly painting in watercolor on ACEO size  (2.5" x 3.5") paper.  I was happy with my work but I had no focus and no real style of my own.  I kept seeing artists I respected talking about this amazing event called Artfest.  I decided to check it out.  I came home so invigorated, inspired and excited that I felt like I might burst into flames!  I got home at 10 p.m. on a Sunday night.  At 8 a.m. the very next morning, I walked into my garage and spotted a piece of plywood cut in a rectangular shape.  I have no idea why it was there.  I'm guessing my husband cut it for some household project at some time but my only thought was, "That's what I am going to paint on!"  I developed my own techniques, painted like a maniac for 2 months and sent in my application to teach.  I have taught there every year since.

The best thing about Artfest is hands down, the people.  There is a spirit of acceptance and love there that I have never found anywhere else.  There are very few negative personalities, very few artistic secrets.  Almost everyone is not only willing, but excited, to tell you how they did something.

The first year, I posted a little note on the Yahoo bulletin board looking for someone to share a car with.  I met my best bud Cheryl McCloud (thank God for her!!).  For that week each year, we are bonded like sisters, I love her so much!!  Also in my little love circle:  Mindy, Kathie, Kate, Tammie, Regina, Michelle, Jennifer, Nikki.....there are so many, many more people that I pray I will be able to see in some other venue at some time.  You have all meant so much to me.

So....if you have always thought about going to Artfest but always said "maybe next year"....make your plans.  It is not to be missed for this last time.  It could change your life.

Here is a new painting.  This one is larger, about 12" x 20" on plywood.

Double-Sided Copper Pendant Tutorial

A few people have expressed interest in a tutorial to make the copper pendants so here ya go!!

First a few notes:  these pendants turned out to be pretty time-comsuming but well worth it in the end.  I tried several diameters of copper pipe.  I settled on 1 1/4" or below.  The larger diameters are too hard to cut.  You can buy the copper pipe by the foot at Ace hardware.  Unless you are going to go crazy and make bunches of these, 1 foot will be plenty.

Supply list:

Copper Pipe
Copper Pipe Cutter (Get a good one.  I had a cheap one and it was nothing but a problem.  I bought a new one for about $18 at Ace and it was MUCH more successful!)
Small clamp (but large enough to hold the pipe)
18 gauge wire (I used copper but brass would be nice, too)
Air dry clay (I used LaDoll but Creative Paper clay works)
foam sanding block
fine steel wool
small metal file or dremel with sanding bit
Wire cutters
Flat nosed jewelry pliers
Round nosed jewelry pliers
Hole Punch for metal (available on Etsy or any jewelry supply online)
Matte Medium
Aleen's Tacky Glue
ICE Resin

1.  Begin by clamping the clamp onto a work surface.  Clamp in the pipe.  Don't tighten it so much that the pipe is being crushed, just enough so that it doesn't move.

2.  You will want to make your cuts about 3/8" but I didn't measure.  I just eyeballed it.  Attach the pipe cutter from underneath with the wheels and cutting blade facing up.  You want it to be able to turn freely but not loosely.  It shouldn't be hard to turn but shouldn't fall off either.  Reach underneath the cutter and pipe and begin spinning the cutter back and forth smoothly.   After you make a few rotations, turn the screw at the end about a quarter turn and continue rotating.  It's not fast...it does take some time, but eventually, you will cut through the pipe and the piece will fall off.

3.  The piece (I will now call it a bezel) will have some burrs.  You will need to remove these by inserting the corner of the foam sanding block into the opening and rotating it.  If there are and burrs that are too large to be handled that way, use the dremel or file to remove them.  When all feels smooth, use the steel wool both inside and outside to remove any tarnish.

4.  Using the hole punch, make a hole in the top and bottom of the bezel.

5.  Cut a piece of wire about 6 inches long.  Using the round nose pliers, make a couple of loops in  one end of the wire.  Thread the wire through the holes and make a wire-wrapped loop for hanging.  Cut off any excess wire and tuck the end underneath the wrap so it doesn't snag.

6.  Pinch off a small piece of clay (about the size of a small acorn) and flatten it out like a quarter.  Fit it nicely into the center of the bezel.  You may need to add another tiny piece on the other side of the wire.  You are making a base to hold the resin.  Try to keep this as flat and thin as possible and centered around the wire.  You want it to still be recessed on both sides.

7.  Preheat the oven to 250 degrees.  Bake the pendant 20 minutes on each side.

8.  The clay will have shrunken slightly.  Fill in the gaps with Aleen's (or any thick) glue.  Let dry.  Make sure you are thorough!  If not, the resin will find any cracks and flow out the other side (may I say...NOT fun)!

9.  While you wait, print out your images for the inside of the pendant.  I used my own art but there is some cool digital art on Etsy, if you prefer.  I printed them on my inkjet printer on the thinnest photo paper I could find (48 lb).  I'm not sure that matters but it's just information!  Brush on a layer of Matte Medium across the back and then across the front of the print.  Do this with a gentle touch so as not to smear the ink.  This step will seal the print making it safe to use with the resin.  Cut your image to fit the bezel.

10.  Put a thin layer of glue on the clay insert and position your print.  (Just information:  My clay wasn't exactly perfect!  I was worried that the images being not completely flat would affect the outcome.  It didn't.  The resin is very forgiving.  You don't want the image just crammed in, but a slight curve didn't change the outcome.)  Let dry.

11.  Cover a tray with either a piece of trash bag or wax paper in case of spills.  Mix the resin according to the directions.  Be very exact in the measurements.  I used a popsicle stick to put the resin into the bezels.  That way you can control the amount you are putting in.  Cover the images up to the rim of the bezel with the resin.  According to the instructions, if you want a domed top, do the first resin pouring and after drying, do another layer to create the dome.

12.  Look closely at each bezel.  If you see any tiny bubbles....(From experience!!:  HOLD YOUR HAIR BACK!!!!) carefully breathe over the resin.  The heat from your breath will make the bubbles come to the top and burst.  I also noticed a couple of more stubborn bubbles.  I held my heat gun about 2 feet above the bezels and let the heat encourage the bubble to burst without letting the air from the gun push the resin out of the bezel.

13.  Resin takes several days to harden.  After they harden, flip them over and do the same thing on the other side, making them 2-sided.

Ok, Girl-zoes!!!  Post me some pictures of your creations!  I will post final pictures in a few days!!

I love you ALLLLL!!!!!!!!!!!!!!!